We have a hitch lock for your Yakima hitch accessory!
While the Replacement Hitch Bolt, Nut and Clip, part # Y8780022, does not come with a lock, you can use Yakima's hitch lock, part # Y07235, with this bolt (or the bolt that came with your Yakima accessory) to give you the Same-Key-System for that additional security. I've linked to a video review of this lock for you to look at. view full answer...
The Wheel Lock Set for 1/2" Wheel Bolts (2 Locks, 1 Key) # RG01-150 are the traditional 1/2-20, which is the standard for all 1/2" wheel bolts, so as long as that's what type of lug nuts you're replacing then these will work perfectly. I've also linked a review video we did of these, as well. view full answer...
The Global Link Vise Lock for Cam-Action Door # 295-000024 does NOT include installation hardware so you can select that locally. I suggest stainless or galvanized 6mm diameter hardware that is usually available at any full-service hardware store.
When you replace your standard hasp at least one of those existing holes can be reused. This part has three mounting holes; spacing of the holes is noted on the linked photo.
I measured the mounting holes; each of the three holes measures 7mm... view full answer...
Mounting bolts are not included with the CE Smith fender mounting brackets, # CE26061G-2. You will want to use 3/8 inch stainless steel bolts with stainless nuts and lock washers or stainless nylon locking nuts to mount these brackets to your fenders.
I attached a photo showing the brackets attached to a fender for you to see the hardware used. view full answer...
The Rhino-Rack Ski and Snowboard Carrier # RR574 is a great carrier but it only has the locking feature for the skis/boards alone. So yes, someone could technically just remove the mounting hardware and make off with your equipment.
To remedy this I recommend checking out the Yakima FreshTrack 4 Ski and Snowboard Carrier # Y03092 instead. This comes with locks for the skis/boards but it also has security Allen bolts that prevent anyone from loosening up the adjustment knobs when those... view full answer...
The BOLT Toolbox Latch Retro Fit Kit, Codes to Ford Key # BL7022698 that you referenced does not come with a striking plate. Since all of the handles we offer are either retro-fit kits or replacement parts, none of them come with a striking plate.
A latch that may work for you is the UWS Replacement Twist Latch # UWSTWISTLOCK. This lock mount entirely on the outside of the box and is lockable with a padlock. BOLT offers padlocks, like # BL7018519 for Ford keys, that can be keyed to vehicle... view full answer...
Curt Trailer hitch # C12038 does not include lock washers. So it wasn't that you didn't get them it is that the hitch doesn't come with them. Using Loctite would be a great idea. Blue Loctite is should be all you need, # LT37614. Because the red Loctite is pretty much permanent. So should the hitch need to be removed for any reason, it would take pneumatic tools if you used red Loctite.
Also, make sure the bolts are torqued to the specifications in the instructions. If they are too loose... view full answer...
The Jack-It 2 Bike Rack for A-Frame Trailers part # LC429756 comes with two threaded hitch pin bolts which will work to reduce rattle and vibrations so you don't need to purchase any extra devices as this feature is already built-in. I have attached a photo for you which shows the two threaded hitch pin bolts. The only extra item you might want to add are locks for the bikes which can be accomplished with the etrailer.com 10' Long Cable Lock part # e98891. view full answer...
The Kuat Transfer 1 # KU64FR comes with the anti-rattle bolt and a cable lock. This way you gain a lock and keep your anti-rattle device.
The Kuat Transfer 1 fits your Highlander's 2 inch hitch out of the box with the included adapter. The below video is a great resource showing how the anti-rattle bolt can reduce hitch movement and rattle. view full answer...
Yes, the hasp - or keeper latch - is included with the 36" Lock Side-Door Bar Lock Assembly # 305736. The only thing you will need to get separately are is the mounting hardware, which will be 5/16" carriage bolts and matching washers and nuts.
I have added a link to a video review of this assembly for you to check out as well. view full answer...
I spoke with my contact at CE Smith and she informed me that the Bolster bracket # CE10001G-4 does come with the bolt and lock nut. The mounting hardware to attach the swivel bracket to the bunk is not included. view full answer...
The Swagman Titan 2 Bike Carrier # S63400 does include a Built-in cable lock. You can add a threaded anti-rattle hitch bolt to hold the rack in place in your hitch and to reduce motion with part # S64029 . view full answer...
The bolts for the Westin Safari Light Bar, # 30-0005-1135, that attach the mounting brackets to the frame are M10 - 1.50x30MM hex head bolts. They also use a 10MM flat washer and a 10MM lock washer for each bolt.
I have attached the installation instructions which lists all of the hardware. The instructions also list the torque specs for each of the bolts. view full answer...
The Swagman XTC4 4-Bike Rack part # S64665 does indeed come with locks, both a hitch pin bolt to secure the rack to the receiver and a steel cable to secure the bikes to the rack. I have attached for you a full list of parts that come with. view full answer...
Yes, the 36" Lock Side-Door Bar Lock Assembly # 305736 comes with everything except mounting hardware that you would need to provide. It comes with pipe, brackets and hasp.
Check out the review video I attached to see all of the parts laid out on our demo table. view full answer...
The hardware kit for your 2011 Lexus RX 350 has been discontinued by Aries. I do have a list of the hardware that you can source locally.
2- 12mm Lock Washers
2- 12mm Hex Nuts
2- 12mm Oversize Hex Nuts
2- 12mm ID x 35mm OD x 3mm Flat Washers
2- 8-1.00mm x 25mm Hex Bolts
2- 8-1.25mm x 40mm Hex Bolts
8- 16 mm Lock Washers
8- 8mm ID x 22m OD x 3mm Flat Washers
The two 12-1.75mm x 60mm Bolt Plates, two 12-1.75mm x 120mm Bolt Plate and two 8mm Nut Plate will not be able to be sourced locally... view full answer...
The mounting hardware for the # UWSTHLOCK is not included. I would recommend riveting the lock into place (as UWS does when constructing the boxes) or using one-way security bolts for added security. view full answer...
The Draw-Tite Class III Max-Frame Trailer Hitch, item # 75586, does not come with a pin or bolt to attach accessories to the hitch. These parts are sold separately.
Attaching a bike rack with a built in anti-Rattle Device that requires a threaded hitch pin will require a hitch pin from the bike rack manufacturer. If your bike rack has a hollow receiver you can use the Softride Anti-Rattle Device and Lock for 2 inch Trailer Hitches, item # SR25219 to install a threaded anti-rattle device... view full answer...
The Hollywood Racks Trail Rider # HR200Z does come with the threaded hitch bolt to help limit the movement of the bike rack.
If you would like to add a lock to the bike rack and the bikes then you can also get part # HRLHPTC which comes keyed alike. view full answer...